YeloDeer Pipe Heating Cable

For Exposed Pipes

Indoor & Outdoor Use Self-Regulating Easy Installation Bulk Options Available

Protect exposed water pipes, outdoor plumbing and utility lines with heating cables installed directly on the outside of the pipe.

Plug-In Self-Regulating Pipe Heating Cable with Thermostat & Dual Indicators (PPG-D)

Plug-In Self-Regulating Pipe Heating Cable with Thermostat & Dual Indicators (PPG-D)

Green: Power / Red: Heating 38°F ON / 50°F OFF
Plug-In Self-Regulating Pipe Heating Cable with Thermostat & Dual Indicators (PPG-D)
Plug-In Self-Regulating Pipe Heating Cable with Thermostat (PPG-B)

Plug-In Self-Regulating Pipe Heating Cable with Thermostat (PPG-B)

38°F ON / 50°F OFF
Plug-In Self-Regulating Pipe Heating Cable with Thermostat (PPG-B)
Plug-In Self-Regulating Pipe Heat Cable with Digital Thermostat (PPG-T)

Plug-In Self-Regulating Pipe Heat Cable with Digital Thermostat (PPG-T)

36–140°F Adjustable Control 6.6 ft Remote Pipe Sensor
Plug-In Self-Regulating Pipe Heat Cable with Digital Thermostat (PPG-T)
Plug-In Self-Regulating Pipe Heating Cable without Thermostat (PPG-Y)

Plug-In Self-Regulating Pipe Heating Cable without Thermostat (PPG-Y)

Heats When Powered No Built-In Thermostat
Plug-In Self-Regulating Pipe Heating Cable without Thermostat (PPG-Y)
Cut-to-Length Self-Regulating Heat Tape for Pipes – Bulk Reel (PG)

Cut-to-Length Self-Regulating Heat Tape for Pipes – Bulk Reel (PG)

Residential & Light Commercial 100/300/500 ft Bulk Reels Cut to Length on Site
Cut-to-Length Self-Regulating Heat Tape for Pipes – Bulk Reel (PG)
12V DC Self-Regulating Pipe Heating Cable for RV & Off-Grid Systems

12V DC Self-Regulating Pipe Heating Cable for RV & Off-Grid Systems

Cut-to-Length + Seal Kit 12V DC Low-Voltage Power
12V DC Self-Regulating Pipe Heating Cable for RV & Off-Grid Systems
Trimmable Self-Regulating Pipe Heating Blanket with Thermostat

Trimmable Self-Regulating Pipe Heating Blanket with Thermostat

Straps & Zip Ties Included 38°F ON / 50°F OFF
Trimmable Self-Regulating Pipe Heating Blanket with Thermostat
Aluminum Foil Pipe Heat Trace Blanket

Aluminum Foil Pipe Heat Trace Blanket

No Separate Insulation Needed 120V | 14W/ft Constant Heat Water-Filled Pipes Only
Aluminum Foil Pipe Heat Trace Blanket
Bulk Cut-to-Length Self-Regulating Heat Trace Cable for Roof, Gutter & Pipe (KDL)

Bulk Cut-to-Length Self-Regulating Heat Trace Cable for Roof, Gutter & Pipe (KDL)

CSA Certified 100 / 250 / 500 ft Reels 5W/ft & 8W/ft
Bulk Cut-to-Length Self-Regulating Heat Trace Cable for Roof, Gutter & Pipe (KDL)

For Water Supply Lines (In‑Pipe)

Potable Water 230 PSI Max CSA Certified Food-Grade Jacket

Food-grade in-pipe heating cables for pressurized potable water supply lines.

In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — T-Fitting (IPHC-T)

In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — T-Fitting (IPHC-T)

Drinking-Water Safe (NSF/ANSI 61) CSA Certified Custom Lengths Available
In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — T-Fitting (IPHC-T)
In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — Y-Fitting (IPHC-Y)

In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — Y-Fitting (IPHC-Y)

Drinking-Water Safe (NSF/ANSI 61) CSA Certified Custom Lengths Available
In-Pipe Heating Cable for 3/4 in+ Water Supply Lines — Y-Fitting (IPHC-Y)
Note: Use drinking-water-rated in-pipe heating cables for potable water supply lines. Do not use sewer or drain heating cables in drinking water lines.

For Drain & Sewer Lines (In‑Pipe)

Wastewater Drain Lines Sewer Systems Low-Pressure Options

In-pipe heating cables for sewer, septic, condensate, and low-pressure drain applications.

In-Drain Heating Cable for 2–6 in Drain Lines (IPHC-DMa)

In-Drain Heating Cable for 2–6 in Drain Lines (IPHC-DMa)

CSA Certified Built-In GFCI Custom Lengths Available
In-Drain Heating Cable for 2–6 in Drain Lines (IPHC-DMa)
In-Drain Heating Cable for Drain Lines Under 2 in (IPHC-DMi)

In-Drain Heating Cable for Drain Lines Under 2 in (IPHC-DMi)

Slim Cable Profile Condensate & Low-Pressure
In-Drain Heating Cable for Drain Lines Under 2 in (IPHC-DMi)
In-Drain Heating Cable Kit for 1/2 & 3/4 in Non-Pressurized Condensate Lines (DGK)

In-Drain Heating Cable Kit for 1/2 & 3/4 in Non-Pressurized Condensate Lines (DGK)

PVC Y-Fitting Included CSA Certified Cable
In-Drain Heating Cable Kit for 1/2 & 3/4 in Non-Pressurized Condensate Lines (DGK)
In-Hose RV Sewer Heating System for 15 ft & 20 ft Sewer Hoses (RVIH)

In-Hose RV Sewer Heating System for 15 ft & 20 ft Sewer Hoses (RVIH)

YeloDeer Original Design 5W/ft Self-Regulating Fits 15 & 20 ft Hoses CSA-Certified Heating Cable Built-In GFCI
Pipe & Tank In-Pipe Freeze Protection Kit with Cable Entry Gland (CEG)

Pipe & Tank In-Pipe Freeze Protection Kit with Cable Entry Gland (CEG)

Low-Static-Head Use 2 in+ Round Pipe Entry CSA-Certified Cable
Note: Sewer and drain heating cables are for wastewater or low-pressure drain applications. They should not be used in potable drinking water lines.

Controllers & Accessories

Accessories 316 Stainless Steel Installation Support

Fittings and adapters for in-pipe heating cable installation support.

Heat Tape Thermostat Controller for Pipe Freeze Protection

Heat Tape Thermostat Controller for Pipe Freeze Protection

120V Plug-In / 208–240V Hardwired 15A Max Load 15 ft Remote Sensor
Heat Tape Thermostat Controller for Pipe Freeze Protection
PET Fish Tape for Conduit Wire Pulling

PET Fish Tape for Conduit Wire Pulling

PET Fish Tape for Conduit Wire Pulling
316 Stainless Steel NPT Reducer Adapter for In-Pipe Cable Fittings

316 Stainless Steel NPT Reducer Adapter for In-Pipe Cable Fittings

316 Stainless Steel NPT Reducer Adapter for In-Pipe Cable Fittings
316 Stainless Steel Female NPT T-Fitting for In-Pipe Cable Entry

316 Stainless Steel Female NPT T-Fitting for In-Pipe Cable Entry

316 Stainless Steel Female NPT T-Fitting for In-Pipe Cable Entry
316 Stainless Steel Hose Barb × Male NPT Adapter Set with Clamps

316 Stainless Steel Hose Barb × Male NPT Adapter Set with Clamps

316 Stainless Steel Hose Barb × Male NPT Adapter Set with Clamps
Note: Choose the in-pipe heating cable first, then select the fitting or adapter required for the installation.