Inside the two-pad kit
ProMasters Only opens a YeloDeer 12V RV tank heater kit and examines the two heating pads, leads, adhesive backing, tape and switch panel. The close-ups show the size of the pads and the separate switch controls before installation.
The creator begins by exploring an idea for warming lithium batteries in his van. He also identifies RV fresh, gray and black water tanks as the product's intended application. These are different uses, and the distinction matters when planning an installation.
Switch-panel walkthrough and heat test
The middle of the video looks at the connections and illuminated switches, then shows a powered pad and its heating pattern through a thermal camera. This is a useful view of the components and the creator's immediate observations.
The footage does not establish a guaranteed operating temperature, winter runtime or freeze-protection performance. At about 6:17, the creator explains that the planned installation in the van has not yet been completed.
Match the pad to the RV water-tank application
The corresponding product is the YeloDeer 12V RV Tank Heater Pad with Switch, rather than the 120V plug-in version. Each 12 × 18 in pad is rated at 60W and draws approximately 5A at 12V DC. Two pads together require approximately 10A while powered; battery capacity, other loads and operating time all affect available runtime.
Use one dedicated switch channel per pad. Do not connect multiple 60W pads to a single 6A switch channel. Provide the required circuit protection and follow the product instructions for wiring, mounting and operation. The video is a component walkthrough, not a complete wiring procedure.
YeloDeer installation and control notes
Mount only on a compatible, clean, dry, flat tank surface. Do not cut, fold or resize the pad, and never operate it on an empty tank. A tank heater pad does not protect exposed pipes, valves or fittings elsewhere in the water system.
The illuminated panel provides manual on/off control. Built-in overheat protection does not establish an automatic thermostat setpoint or replace operator control. Turn the pad off when freeze protection is no longer required.
The battery-heating idea is the creator's proposed experiment; this video does not verify that application. Follow the battery manufacturer's temperature and charging requirements, and confirm suitability with YeloDeer before considering use outside the specified tank application.
Questions about this video
Does the video show a finished RV or battery installation?
No. It shows unboxing, a switch-panel walkthrough and a bench heat test. The creator says that the installation in the van is still planned.
Do these pads turn on and off automatically with temperature?
The featured 12V kit uses manual switch control. Its built-in overheat protection is different from an automatic temperature-controlled on/off thermostat.
Can I use the video to size my RV battery system?
Use the actual pad load and your planned operating time, alongside the battery's usable capacity and every other electrical load. The nominal draw is approximately 5A per pad at 12V; the video does not demonstrate overnight battery runtime.
About this video
Created by ProMasters Only and embedded from the original YouTube upload with permission. The creator's observations and proposed battery experiment are separate from YeloDeer's product specifications and installation guidance.
