Connection & Termination Kits for YeloDeer Cut-to-Length Heat Trace Cables
YeloDeer Connection and Termination Kits are designed for compatible YeloDeer cut-to-length self-regulating heat trace cables used in roof de-icing, gutter heating, downspout protection, and external pipe freeze protection systems.
Bulk self-regulating heating cable is not ready to use until it is properly connected, sealed, terminated, mounted, and tested. These kits help complete the heating cable system by providing the correct power connection, end seal, splice, or tee connection components for different project layouts.
Important: These are accessories for compatible YeloDeer cut-to-length heat trace cables.
They are not standalone heating products. Before ordering, confirm your heating cable model, voltage, installation layout, power connection method, and whether you need an end seal, splice, tee, or plug-in power kit.
Quick Selection Snapshot
KYSF01 Hardwired power connection kit for professional or permanent installations. Includes 1 KYSF02 End Seal Kit.
KYSF02 Standalone end seal kit for additional heating cable tail ends or replacement needs.
KYSF03 Plug-in power kit with integrated GFCI plug for compatible 120V cable setups. Includes 1 KYSF02 End Seal Kit.
KYSF04 Splice and tee joiner kit for extensions, branches, and complex layouts. Includes 1 KYSF02 End Seal Kit.
Simple Selection Guide
| Need to connect cable to a junction box? |
Choose KYSF01 Hardwired Power Connection Kit (1 KYSF02 kit included). |
| Need an additional or replacement end seal? |
Choose KYSF02 End Seal Termination Kit. KYSF01, KYSF03, and KYSF04 each already include 1 KYSF02 kit. |
| Need a 120V plug-in connection? |
Choose KYSF03 Plug-In Power Kit with GFCI (1 KYSF02 kit included). |
| Need to extend or branch cable? |
Choose KYSF04 Splice and Tee Joiner Kit (1 KYSF02 kit included). |
Model Breakdown
KYSF01 Hardwired Power Connection Kit (1 KYSF02 kit included)
Junction Box Connection Permanent Installation Professional Setup Pipe / Roof Use
KYSF02 End Seal Termination Kit
End Seal Cut Cable Tail End Moisture Protection Required for Cut Ends
KYSF03 Plug-In Power Kit with GFCI (1 KYSF02 kit included)
120V Plug-In Setup Integrated GFCI Plug Roof / Gutter Use Fast Power Entry
KYSF04 Splice and Tee Joiner Kit (1 KYSF02 kit included)
Cable Extension Tee Branch Complex Layouts Roof Valleys / Gutter Corners
Use It For / Do Not Use It For
Use It For Compatible YeloDeer cut-to-length roof de-icing cables, gutter heating cables, downspout heating systems, and external pipe heat trace installations.
Do Not Use It For Non-compatible heating cables, damaged cable, unapproved field wiring, submerged electrical connections, or installations where the cable type and voltage have not been confirmed.
Why the Correct Kit Matters
Power Connection A cut-to-length heating cable needs the correct power entry before it can be energized.
End Sealing Every cut cable end must be properly sealed to reduce moisture entry and electrical failure risk.
Layout Flexibility Splice and tee kits help support extensions, roof valleys, gutter corners, and branch layouts.
Moisture Protection Heat-shrink and sealing components help protect connection areas from outdoor moisture when installed properly.
Project Matching Different projects require different connection methods, from plug-in setup to hardwired installation.
Professional Installation Support Useful for installers, contractors, roof de-icing projects, and custom heat trace layouts.
For compatible bulk cable, view YeloDeer Bulk Self-Regulating Roof & Pipe Heat Trace Cable.
Model Comparison Table
| Model |
KYSF01 Hardwired |
KYSF02 End Seal |
KYSF03 Plug-In GFCI |
KYSF04 Splice / Tee |
| Primary Function |
Power connection to junction box |
End termination |
120V plug-in power entry |
Cable-to-cable splice or tee branch |
| End Seal Kit Included |
1 KYSF02 kit included |
Standalone end seal kit |
1 KYSF02 kit included |
1 KYSF02 kit included |
| Best For |
Permanent or professional installations |
Additional tail ends or replacement needs |
120V plug-in roof or gutter projects |
Extensions, branches, and complex layouts |
| Typical Application |
Roof de-icing or pipe heat trace |
Essential end sealing |
Roof, gutter, or downspout heating |
Roof valleys, gutter corners, branch layouts |
| Installer Level |
Intermediate / professional |
Basic to intermediate |
Basic to intermediate |
Intermediate / professional |
| Important Note |
Use with suitable junction box and electrical protection |
Do not leave cut cable ends unsealed |
Confirm cable voltage and load before use |
Confirm branch layout and circuit length before installation |
Each included KYSF02 kit seals one heating cable tail end. Order additional KYSF02 kits if your layout has more tail ends than the included kits cover.
Compatibility Checklist
Compatible YeloDeer cut-to-length cable Correct voltage for the project Correct kit for power, end seal, splice, or tee Proper circuit and load planning Dry and clean cable preparation area Outdoor-rated electrical protection where required No damaged cable jacket or exposed conductors Installer understands termination steps
Certification & Compliance Note
Use only compatible accessories for the heating cable model and installation type. Certification and code compliance depend on the exact cable, kit, voltage, rating, installation method, and local electrical requirements.
If your project requires inspection or code approval, confirm requirements with a qualified electrician or local authority before installation.
Installation Notes
Connection and termination quality is critical for any cut-to-length self-regulating heat trace cable system. Read the instructions carefully and do not energize the cable until the power connection, end seal, splice, or tee has been installed correctly.
Prepare Cable Carefully Cut, strip, and prepare the cable only according to the kit instructions.
Seal Every Cut End Do not leave conductors, braid, or internal layers exposed.
Protect from Moisture Keep connection and termination areas protected from water intrusion.
Use Correct Kit Do not substitute a power kit, end seal, splice, or tee kit for a different function.
Plan Circuit Length For splice and tee layouts, confirm total circuit length and electrical load before installation.
Use Qualified Help For hardwired or complex installations, consult a qualified electrician or installer.
Important Installation Reminder: Do not leave cut heating cable ends exposed. Do not energize the cable until all required power connections, end seals, splices, or tee connections are properly completed and inspected.
