Modern thermostats like the YeloDeer ES29AW give you multiple ways to monitor and control heat. Choosing the right mode is essential for balancing your comfort with the safety of your flooring.
1. Floor Mode (Recommended)
In this mode, the thermostat focuses solely on the temperature reported by the external floor sensor.
Best For: Bathrooms and kitchens where "warm feet" are the priority.
Advantage: It is the most direct way to control electric radiant systems.
2. Room Mode
The thermostat relies on its internal sensor to measure ambient air temperature.
When to Use: Only as an alternative if the floor sensor is unavailable or broken.
Note: It does not directly measure the floor surface temperature, which may lead to the floor feeling cooler than expected.
3. Both Mode (Advanced Protection)
This mode uses the room sensor for primary control but uses the floor sensor as a temperature limit.
Best For: Living rooms or bedrooms with sensitive flooring like Engineered Wood or LVP.
Advantage: It ensures the room stays warm while preventing the floor from exceeding a safe temperature (e.g., 82°F), protecting your investment from heat damage.
Fine-Tuning: Calibration
Sometimes, your thermostat might be installed near a drafty door or a sunny window, causing the reading to be slightly off.
Room/Floor Calibration: If you notice a consistent difference between the thermostat and a handheld thermometer, use the Calibration setting to adjust the display (e.g., +2°F or -2°F).
Caution: Calibration is for minor environmental adjustments, not for fixing incorrect sensor type settings.
Explore Smart Thermostat Settings | Get Professional Installation Help