55 Gallon Drum Heater Blanket for Controlled Full-Coverage Warming
A 1200W 55 gallon drum heater with full-wrap heating, an insulated top cover, and a digital thermostat for materials that need controlled warming, viscosity reduction, or temperature maintenance.
55 Gallon Drum Fit Designed for standard 55 gal drums and similar-size containers around 26.77 in diameter.
1200W / 120V AC Higher-output full-coverage heating for larger-volume containers.
36–140°F Thermostat Digital adjustable control from 1–60°C with real-time display.
0–10 Hour Timer Use timed heating or controlled temperature maintenance for your process.
Before You Order
Container: Standard 55 gal drum or similar-size container Drum diameter: Approx. 26.77 in / 68 cm Blanket size: 35.43 × 82.68 in / 90 × 210 cm Power: 120V AC / 1200W Temperature: Adjustable 36–140°F / 1–60°C Timer: 0–10 hours Included: Full-wrap blanket, insulated top cover, digital controller Sensor: Must remain correctly positioned against the drum surface
Non-hazardous materials only. Do not use this heater with flammable, combustible, explosive, or hazardous materials, or in hazardous locations requiring certified explosion-proof equipment.
The thermostat reads at the container surface. A full 55-gallon drum or thick material can take additional time for heat to move from the drum wall toward the center of the contents.
55 Gallon or 5 Gallon?
Choose This 55 Gallon Drum Heater For standard 55 gal drums, 1200W full-coverage heating, 36–140°F digital control, and larger-volume industrial or commercial warming.
Choose the 5 Gallon Honey Warmer For standard 5 gal buckets, 200W controlled heating, 41–158°F adjustment, and small-batch honey warming or decrystallizing.
Need the smaller controlled-heating version? See the 5 Gallon Digital Honey Bucket Warmer →
Do not order by gallon capacity alone. Measure the actual drum. This blanket is designed around a standard 55-gallon drum with approximately 26.77 in / 68 cm diameter; it is not sized for a standard 5-gallon bucket.
Need Higher Temperature Heating?
This blanket thermostat is limited to 140°F / 60°C. If your compatible material requires a higher temperature range or a narrower silicone heating band, compare the YeloDeer Silicone Drum & Pail Heater →.
Controlled Warming for 55 Gallon Drums
Oils & Lubricants
Industrial Oils Lubricants Viscosity Reduction
Helps warm compatible thick oils and lubricants so they flow, pump, or dispense more easily.
Paints & Coatings
Paint Coatings Material Conditioning
Provides controlled warming for compatible non-hazardous coatings affected by cold storage.
Adhesives & Resins
Adhesives Resins Thick Materials
Helps reduce low-temperature thickening when the material manufacturer permits external heating.
Food-Related Materials
Honey Syrups Viscous Ingredients
Can provide controlled warming for compatible food materials when the selected temperature is suitable for the product and container.
Container Compatibility
Designed primarily for standard 55 gallon drums approximately 26.77 in / 68 cm in diameter and similar-size compatible containers.
Compatible metal drums Compatible plastic drums Similar-size non-hazardous containers Containers suitable for external surface heating
Plastic drums require lower temperatures. YeloDeer recommends keeping the thermostat below 100°F / 37°C for plastic containers unless the container manufacturer specifically approves a higher temperature.
Not Suitable For
- Flammable or combustible liquids
- Explosive materials or atmospheres
- Hazardous chemicals
- Hazardous locations requiring certified equipment
- Leaking, cracked, or damaged drums
- Materials with unknown safe heating limits
- Immersion or submerged heating
- Standard 5-gallon buckets
- Applications requiring temperatures above the 140°F thermostat setting limit
Before Installation
Measure the drum before ordering Confirm the contents are non-hazardous Confirm the drum is safe for external heating Inspect the blanket, sensor, controller, and cord Use a properly grounded 120V outlet Keep electrical components dry
Basic Setup
- Place the drum on a stable surface and inspect it for leaks or damage.
- Insert the thermostat probe fully into the supplied sensor pocket.
- Place the aluminum foil side of the sensor pocket directly against the drum surface.
- Keep the sensor pocket firmly positioned so it maintains consistent contact.
- Wrap the heating blanket evenly around the drum.
- Remove gaps, folds, overlaps, or tight creases.
- Secure the blanket using the Velcro straps and adjustable buckles.
- Install the insulated top cover.
- Connect the heater to the digital thermostat controller.
- Plug the controller into a properly grounded 120V AC outlet.
- Select a suitable temperature and timer setting for the material and container.
- Monitor the first heating cycle and verify actual material condition before relying on the setting for routine operation.
Correct sensor placement is required for thermostat control. Do not leave the sensor hanging in open air. The sensor pocket must remain against the drum surface.
Do Not
Do Keep the blanket flat, maintain drum contact, inspect the power system regularly, and use temperature settings appropriate for the container and material.
Do Not Fold, overlap, puncture, cut, sharply crease, or modify the heating blanket. Do not operate it on a leaking or unsuitable container.
After Use
Turn the heater off, unplug it, and allow the blanket and drum surface to cool before removing or storing the heater. Store the blanket dry and avoid sharp folds or mechanical damage.
How to Choose a Drum or Pail Heater
Container size, material viscosity, required temperature, heating speed, and thermostat type all affect heater selection. YeloDeer's container heating guide compares 55 gallon drum and 5 gallon pail heating approaches for commercial and industrial applications.
Read the Industrial Container Heating Guide →
Quick Selection Check
Confirm actual drum dimensions Confirm 120V / 1200W power availability Check the material's safe heating range Check the drum's maximum safe temperature Decide whether 140°F maximum control is sufficient Confirm the material is non-hazardous
Need help checking compatibility? Email yelodeer@yelodeer.com with the drum dimensions and material, contents, starting temperature, target temperature, and application photos.
