10 & 55 Gallon Drum Heater Blankets with Digital Temperature Control

Choose a 300W 10 gallon drum heater or a 1200W 55 gallon drum heater for compatible materials that need controlled warming, viscosity reduction, or temperature maintenance. Both options include a digital thermostat, a 0–10 hour timer, and an insulated top cover to help reduce heat loss.
Two Size Options 10 Gallon / 300W or 55 Gallon / 1200W. Select the size that matches your actual container.
36–140°F Thermostat Adjustable from 1–60°C with a digital display and switchable °F / °C units.
0–10 Hour Timer Set the heating time to suit your material and process.
Insulated Top Cover A passive insulation cap helps retain heat. The top cover is not electrically heated.
Choose Your Drum Size
10 Gallon — 300W For compatible 10-gallon containers and smaller batches of oils, honey, and other suitable materials. Confirm the container diameter, height, and electrical requirements before ordering.
55 Gallon — 1200W / 120V AC For compatible 55-gallon drums and larger-volume warming. Blanket size: 35.43 × 82.68 in / 90 × 210 cm. Listed drum diameter: approximately 26.77 in / 68 cm.
Before You Order
Size: Select 10 Gallon or 55 Gallon Fit: Measure the actual container diameter and height Power: 300W for 10 Gallon; 1200W for 55 Gallon Electrical supply: Match the selected model's rating label Temperature: Adjustable 36–140°F / 1–60°C Timer: 0–10 hours Included: Heating blanket, insulated top cover, and digital controller Installation: Follow the sensor and controller instructions supplied with your model
Do not order by gallon capacity alone. The two blankets are different sizes and are not interchangeable. Confirm the fit against your actual container. For the 10-gallon option, contact us with the container dimensions to confirm fit and voltage before ordering. The 55-gallon dimensions listed on this page do not apply to the 10-gallon model.
Non-hazardous materials only. Do not use these heaters with flammable, combustible, explosive, or hazardous materials, or in hazardous locations requiring certified explosion-proof equipment.
A thermostat reading does not confirm the temperature throughout the contents. Heat takes time to move from the container wall toward the center. Container size, material thickness, starting temperature, and ambient conditions affect warming time.
Need a 5 Gallon Honey Warmer?
For standard 5-gallon honey buckets, see the separate 5 Gallon Digital Honey Bucket Warmer →. That model provides 200W heating, 41–158°F temperature adjustment, and a 0.5–12 hour timer. Neither the 10-gallon nor the 55-gallon blanket is a substitute for a correctly sized 5-gallon bucket warmer.
Need Higher Temperature Heating?
Both blanket options have a maximum thermostat setting of 140°F / 60°C. If your compatible material requires a higher temperature range or a narrower silicone heating band, compare the YeloDeer Silicone Drum & Pail Heater → and check the temperature range of the selected control option.

Controlled Warming for Compatible 10 & 55 Gallon Containers

Select the blanket size that fits your container, then confirm that both the container and its contents are suitable for external heating.
Oils & Lubricants
Industrial Oils Lubricants Viscosity Reduction
Helps warm compatible non-hazardous oils and lubricants so they flow, pump, or dispense more easily.
Paints & Coatings
Paint Coatings Material Conditioning
Provides controlled warming for compatible non-hazardous coatings affected by cold storage, when the material manufacturer permits external heating.
Adhesives & Resins
Adhesives Resins Thick Materials
Helps reduce low-temperature thickening in compatible non-hazardous materials within their approved heating limits.
Food-Related Materials
Honey Syrups Viscous Ingredients
Provides external warming for compatible food materials when the selected temperature is suitable for both the contents and the container.
Container Compatibility
10 Gallon Option For compatible 10-gallon metal drums and plastic or polyethylene containers, including suitable honey and paint buckets. Actual dimensions and permitted heating temperatures must be checked.
55 Gallon Option For compatible 55-gallon drums and similar-size containers. Listed drum diameter: approximately 26.77 in / 68 cm. Blanket size: 35.43 × 82.68 in / 90 × 210 cm.
Correctly sized metal drums Compatible plastic or polyethylene containers Non-hazardous contents approved for warming Containers approved for external surface heating
Plastic containers require lower temperatures. Keep the thermostat below 100°F / 37°C and follow any lower limit specified by the container or material manufacturer. Do not assume that every plastic container is suitable for external heating.
Not Suitable For
- Flammable or combustible liquids
- Explosive materials or atmospheres
- Hazardous chemicals
- Hazardous locations requiring certified equipment
- Leaking, cracked, or damaged containers
- Materials with unknown safe heating limits
- Immersion or submerged heating
- Standard 5-gallon buckets or other containers that do not match the selected blanket
- Applications requiring thermostat settings above 140°F / 60°C
Before Installation
Confirm the selected blanket fits the container Confirm the contents are non-hazardous Confirm the container is safe for external heating Inspect the blanket, controller, sensor, and cord Match the electrical supply to the model's rating label Keep electrical components dry
Follow the instructions supplied with your selected model. The 55-gallon option is rated for 120V AC. Confirm the 10-gallon model's electrical requirements before connecting it. Do not assume that model-specific sensor or wiring details are identical.
Basic Setup
- Place the container on a stable surface and inspect it for leaks or damage.
- Check the selected model's manual for sensor placement and controller connection instructions.
- For the 55-gallon model, insert the thermostat probe fully into the supplied sensor pocket. Place the aluminum foil side of the pocket directly against the drum surface and keep it firmly in contact.
- For the 10-gallon model, position any supplied temperature sensor exactly as directed in its user manual.
- Wrap the correctly sized heating blanket evenly around the container.
- Remove gaps, folds, overlaps, and tight creases.
- Secure the blanket using the hook-and-loop straps and adjustable buckles.
- Fit the insulated top cover as instructed. The cover retains heat and does not provide electric heating.
- Connect the heater and digital thermostat controller according to the supplied instructions.
- Connect to a properly grounded outlet matching the model's rated voltage. Use a 120V AC outlet for the 55-gallon model.
- Select a suitable temperature and timer setting for the material and container.
- Monitor the first heating cycle and check the actual contents before relying on the setting for routine operation.

Correct sensor placement is required for temperature control. For the 55-gallon model, the sensor pocket must remain against the drum surface; do not leave the probe hanging in open air. Follow the 10-gallon model's manual for its sensor arrangement. A timer does not replace correct installation or monitoring.
Do and Do Not
Do Keep the blanket flat, maintain proper container contact, inspect the electrical components regularly, and use temperatures suitable for the container and contents.
Do Not Fold, overlap, puncture, cut, sharply crease, or modify the blanket. Do not operate it on a leaking or unsuitable container, and do not immerse the heater or electrical components.
After Use
Turn the heater off, unplug it, and allow the blanket and container surface to cool before removing or storing the heater. Store the blanket dry and avoid sharp folds or mechanical damage.
The capacity-specific guides below focus on 55-gallon drums. Do not use their dimensions, wattage, or model-specific installation details as specifications for the 10-gallon option. Follow the manual supplied with your selected model.
Choose and Check Fit
Use and Troubleshoot
Unsure about compatibility? Email yelodeer@yelodeer.com with your preferred size, container diameter and height, container material, contents, available supply voltage, temperature requirements, and application photos.