{"product_id":"drainguard-condensate-drain-heating-cable-kit","title":"DrainGuard Condensate Drain Heating Cable Kit | YeloDeer","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section\"\u003e\n\u003cp\u003e\u003cstrong\u003eIn-Pipe Freeze Protection for Condensate Drain Lines, Furnace Drains \u0026amp; Small Non-Pressurized Drain Lines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYeloDeer DrainGuard is an in-pipe heating cable kit designed to help protect small, non-pressurized drain lines from freezing. It is especially useful for HVAC condensate drains, high-efficiency furnace drain lines, condensing water heater or boiler drains, ice maker drains, humidifier drains, dehumidifier drains, and other low-flow drain applications that may freeze in cold weather.\u003c\/p\u003e\n\u003cp\u003eUnlike external heat tape that warms the outside of the pipe first, DrainGuard places a self-regulating heating cable directly inside the drain line through a dedicated PVC Y-fitting and rubber sealing assembly. This helps bring heat closer to where ice forms, helping keep the actual drainage path open during freezing conditions.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed for \u003cstrong\u003enon-pressurized drain applications only\u003c\/strong\u003e. It is not intended for pressurized water supply lines, potable drinking water lines, PEX supply lines, or sealed water systems carrying internal water pressure.\u003c\/p\u003e\n\n\u003ch4\u003eQuick Fit Snapshot\u003c\/h4\u003e\n\u003cdiv class=\"yd-decision-strip\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCondensate Drain Protection\u003c\/strong\u003e \u003cspan\u003eDesigned for HVAC condensate drains, furnace drains, boiler drains, ice maker drains, and similar small drain lines.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eIn-Pipe Heating Design\u003c\/strong\u003e \u003cspan\u003eThe heating cable is inserted into the drain line to help protect the internal flow path directly.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e3\/4\" Standard, 1\/2\" Adaptable\u003c\/strong\u003e \u003cspan\u003eDesigned for 3\/4\" drain lines and adaptable to 1\/2\" drain lines using the included components.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eNon-Pressurized Drains Only\u003c\/strong\u003e \u003cspan\u003eNot for pressurized plumbing, potable water supply, or sealed water lines carrying internal pressure.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eKey Benefits\u003c\/h4\u003e\n\u003cdiv class=\"yd-scenario-grid\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eHelps Prevent Frozen Drain Lines\u003c\/strong\u003e \u003cspan\u003eHelps reduce ice buildup and drainage blockage in small low-flow drain lines during winter.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDirect Internal Heat\u003c\/strong\u003e \u003cspan\u003ePlaces heat inside the drain line, closer to the water path where ice commonly forms.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eBetter for Hard-to-Wrap Areas\u003c\/strong\u003e \u003cspan\u003eUseful where drain lines pass through walls, floors, crawl spaces, garages, basements, tight corners, or partially buried sections.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSelf-Regulating Technology\u003c\/strong\u003e \u003cspan\u003eAutomatically adjusts heat output as surrounding temperature changes for reliable winter operation.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCSA-Certified Heating Cable\u003c\/strong\u003e \u003cspan\u003eUses a CSA-certified self-regulating heating cable for residential and light commercial drain freeze protection.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eFluoropolymer Outer Jacket\u003c\/strong\u003e \u003cspan\u003eDurable cable jacket helps resist moisture, corrosion, and damp drain-line environments.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eBest For\u003c\/h4\u003e\n\u003cdiv class=\"yd-category-grid\"\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eHVAC \u0026amp; Furnace Drains\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eHVAC Condensate\u003c\/span\u003e \u003cspan\u003eFurnace Drains\u003c\/span\u003e \u003cspan\u003eHeat Pump Condensate\u003c\/span\u003e \u003cspan\u003eUtility Drains\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eCondensing Equipment\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eCondensing Water Heaters\u003c\/span\u003e \u003cspan\u003eBoiler Drains\u003c\/span\u003e \u003cspan\u003eEquipment Drain Lines\u003c\/span\u003e \u003cspan\u003eLow-Flow Drainage\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eSmall Appliance Drains\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eIce Maker Drains\u003c\/span\u003e \u003cspan\u003eHumidifier Drains\u003c\/span\u003e \u003cspan\u003eDehumidifier Drains\u003c\/span\u003e \u003cspan\u003eSmall Drain Lines\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eCold-Exposure Areas\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eBasements\u003c\/span\u003e \u003cspan\u003eGarages\u003c\/span\u003e \u003cspan\u003eCrawl Spaces\u003c\/span\u003e \u003cspan\u003eExterior Walls\u003c\/span\u003e \u003cspan\u003eUnheated Rooms\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eImportant Before You Order\u003c\/h4\u003e\n\u003cdiv class=\"yd-critical-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis product is for small, non-pressurized drain lines only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrainGuard is not designed for pressurized water lines, potable drinking water lines, PEX supply lines, main household water lines, or any pipe carrying internal water pressure.\u003c\/p\u003e\n\u003cp\u003eIf you need freeze protection for a pressurized potable water line, choose \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Standard In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/yelodeer-y-in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Y-Fitting In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-check-grid\"\u003e\n\u003cspan\u003eYour drain line is non-pressurized\u003c\/span\u003e \u003cspan\u003eYour pipe size is 3\/4\" or 1\/2\"\u003c\/span\u003e \u003cspan\u003eThe pipe is PVC or ABS drain pipe\u003c\/span\u003e \u003cspan\u003eThe drain line is not already blocked or frozen solid\u003c\/span\u003e \u003cspan\u003eYou can cut and reconnect a short section of pipe\u003c\/span\u003e \u003cspan\u003eYou can use the correct primer and solvent cement\u003c\/span\u003e \u003cspan\u003eThe outlet is a grounded 120V AC outlet\u003c\/span\u003e \u003cspan\u003eOutdoor electrical connections can be protected from weather\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eSelf-Regulating Does Not Mean Auto-Off\u003c\/h4\u003e\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eThis cable automatically adjusts heat output based on surrounding temperature. It produces more heat in colder conditions and reduces output as temperatures rise.\u003c\/p\u003e\n\u003cp\u003eHowever, self-regulating does not mean the cable turns itself completely off. To stop heating completely, unplug the cable or use a compatible thermostat controller.\u003c\/p\u003e\n\u003cp\u003eFor automatic seasonal operation and energy savings, use this product with a \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/pipe-heat-tape-thermostat\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Pipe Heat Tape Thermostat\u003c\/strong\u003e\u003c\/a\u003e, sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eFreeze Prevention, Not Emergency Thawing\u003c\/h4\u003e\n\u003cdiv class=\"yd-critical-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eDrainGuard is designed for freeze prevention.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your drain line is already frozen, blocked, leaking, or damaged, thaw and inspect the line first. Do not force the heating cable into a blocked or unknown pipe route.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section\"\u003e\n\u003ch4\u003eRecommended Applications\u003c\/h4\u003e\n\u003cp\u003eDrainGuard is designed for small, non-pressurized drain lines where freezing may block drainage and cause equipment shutdown, water backup, or repeated winter service issues.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-category-grid\"\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eHVAC Condensate Drain Lines\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eHeat Pumps\u003c\/span\u003e \u003cspan\u003eAir Handlers\u003c\/span\u003e \u003cspan\u003eAttic Condensate\u003c\/span\u003e \u003cspan\u003eUtility Rooms\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eHigh-Efficiency Furnace Drains\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eCondensing Furnaces\u003c\/span\u003e \u003cspan\u003eFurnace Drain Pipes\u003c\/span\u003e \u003cspan\u003eExterior Wall Exits\u003c\/span\u003e \u003cspan\u003eGarage Runs\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eCondensing Water Heater \u0026amp; Boiler Drains\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eBoiler Condensate\u003c\/span\u003e \u003cspan\u003eWater Heater Drains\u003c\/span\u003e \u003cspan\u003eBasement Drains\u003c\/span\u003e \u003cspan\u003eCold Utility Areas\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-category-card\"\u003e\n\u003cstrong\u003eSmall Low-Flow Drain Lines\u003c\/strong\u003e\n\u003cdiv class=\"yd-mini-tags\"\u003e\n\u003cspan\u003eIce Maker Drains\u003c\/span\u003e \u003cspan\u003eHumidifier Drains\u003c\/span\u003e \u003cspan\u003eDehumidifier Drains\u003c\/span\u003e \u003cspan\u003eAppliance Drain Lines\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003ePipe Compatibility\u003c\/h4\u003e\n\u003cp\u003eThe standard kit is designed for 3\/4\" drain lines. It can also be adapted to 1\/2\" drain lines using the included adapter components.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-pill-grid\"\u003e\n\u003cspan\u003e3\/4\" PVC Drain Pipe\u003c\/span\u003e \u003cspan\u003e1\/2\" PVC Drain Pipe\u003c\/span\u003e \u003cspan\u003e3\/4\" ABS Drain Pipe\u003c\/span\u003e \u003cspan\u003e1\/2\" ABS Drain Pipe\u003c\/span\u003e \u003cspan\u003eASTM\/NPS Drain Pipe\u003c\/span\u003e \u003cspan\u003eNon-Pressurized Drain Lines\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-notice-box\"\u003e\n\u003cp\u003eThe included pipe fittings are PVC. When connecting the supplied PVC components to ABS pipe, use approved PVC-to-ABS transition cement where required by local code and cement manufacturer instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eFlexible Drain Hose Applications\u003c\/h4\u003e\n\u003cp\u003eFlexible drain hose installations may be possible in some non-pressurized drain applications, but they require a properly sized hose barb-to-PVC adapter and clamp.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eHose barb adapters and clamps are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConfirm hose size, fitting compatibility, and non-pressurized drain use before installation. Do not use this product on pressurized flexible water lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eWhen Not to Use This Product\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePressurized water supply lines\u003c\/li\u003e\n\u003cli\u003ePotable drinking water lines\u003c\/li\u003e\n\u003cli\u003ePEX water supply pipes under pressure\u003c\/li\u003e\n\u003cli\u003eMain household water lines\u003c\/li\u003e\n\u003cli\u003eFuel, chemical, or industrial process lines\u003c\/li\u003e\n\u003cli\u003eDrain lines that are already blocked, collapsed, or unknown inside\u003c\/li\u003e\n\u003cli\u003eApplications where electrical connections may be submerged in water\u003c\/li\u003e\n\u003cli\u003eInstallations requiring a sealed entry point for a pressurized system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProduct Selection Help\u003c\/h4\u003e\n\u003cdiv class=\"yd-compare-grid\"\u003e\n\u003cdiv class=\"yd-compare-card\"\u003e\n\u003cstrong\u003eChoose DrainGuard If\u003c\/strong\u003e \u003cspan\u003eYou need freeze protection for a small non-pressurized condensate, furnace, boiler, ice maker, humidifier, or dehumidifier drain line.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-compare-card\"\u003e\n\u003cstrong\u003eChoose Potable In-Pipe Cable If\u003c\/strong\u003e \u003cspan\u003eYou need freeze protection inside a pressurized drinking water supply line or household water pipe.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eFor pressurized potable water lines, choose \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Standard In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/yelodeer-y-in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Y-Fitting In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor large sealed sewer or septic applications, choose \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/yelodeer-ipw-in-pipe-heating-cable-for-sewer-systems\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Heavy-Duty Sewer Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section\"\u003e\n\u003ch4\u003eHeating Cable Specifications\u003c\/h4\u003e\n\u003ctable class=\"yd-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eIn-pipe heating cable kit for small non-pressurized drain lines\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003eDrainGuard DGK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Power Output\u003c\/td\u003e\n\u003ctd\u003e3 W\/ft at 50°F \/ 10°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Power Output\u003c\/td\u003e\n\u003ctd\u003e5 W\/ft at 50°F \/ 10°C may be available upon request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eSelf-regulating heating cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating Cable Model\u003c\/td\u003e\n\u003ctd\u003ePG-3CT1 standard \/ PG-5CT1 optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Jacket\u003c\/td\u003e\n\u003ctd\u003eFluoropolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Working Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°F \/ -40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Exposure Temperature\u003c\/td\u003e\n\u003ctd\u003e185°F \/ 85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Maintenance Temperature\u003c\/td\u003e\n\u003ctd\u003e149°F \/ 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus Wire Gauge\u003c\/td\u003e\n\u003ctd\u003e18 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Dimensions\u003c\/td\u003e\n\u003ctd\u003e0.30 × 0.19 in \/ 7.9 × 4.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eCSA-certified heating cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Pipe Size\u003c\/td\u003e\n\u003ctd\u003e3\/4\" drain line standard; 1\/2\" drain line with included adapter components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe Type\u003c\/td\u003e\n\u003ctd\u003ePVC or ABS non-pressurized drain pipe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField Cutting\u003c\/td\u003e\n\u003ctd\u003eDo not cut or modify the heating cable in the field\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eKit Includes\u003c\/h4\u003e\n\u003cdiv class=\"yd-check-grid\"\u003e\n\u003cspan\u003eSelf-regulating heating cable\u003c\/span\u003e \u003cspan\u003e3\/4\" PVC Y-fitting\u003c\/span\u003e \u003cspan\u003eRubber gasket\u003c\/span\u003e \u003cspan\u003eSealing grommet\u003c\/span\u003e \u003cspan\u003eLock nut\u003c\/span\u003e \u003cspan\u003e3\/4\" to 1\/2\" PVC adapters\u003c\/span\u003e \u003cspan\u003ePVC pipe nipples\u003c\/span\u003e \u003cspan\u003eInstallation manual\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eHow to Choose the Right Length\u003c\/h4\u003e\n\u003cp\u003eChoose a cable length based on the total drain-line area that may be exposed to freezing. Measure from the planned Y-fitting entry point to the farthest freeze-prone section of the drain line.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-check-grid\"\u003e\n\u003cspan\u003ePipe length from equipment to exterior exit\u003c\/span\u003e \u003cspan\u003eSections passing through unheated rooms\u003c\/span\u003e \u003cspan\u003eWall penetration areas\u003c\/span\u003e \u003cspan\u003eOutdoor exposed drain sections\u003c\/span\u003e \u003cspan\u003eDrain hose or tubing routed through cold spaces\u003c\/span\u003e \u003cspan\u003eExtra cable needed for nearby wrapping\u003c\/span\u003e \u003cspan\u003eOutlet distance from the installation area\u003c\/span\u003e \u003cspan\u003eWhether pipe insulation will be added\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-critical-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eThe heating cable does not need to be fully inserted into the pipe.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny remaining cable may stay outside the pipe or be wrapped around nearby unheated drain sections for additional freeze protection. Do not cut or shorten the heating cable in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eSuggested Length Guide\u003c\/h4\u003e\n\u003ctable class=\"yd-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 ft\u003c\/td\u003e\n\u003ctd\u003eShort exposed drain sections or compact installations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 ft\u003c\/td\u003e\n\u003ctd\u003eCommon short condensate drain protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 ft\u003c\/td\u003e\n\u003ctd\u003eLonger runs through basements, garages, crawl spaces, or wall exits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 ft\u003c\/td\u003e\n\u003ctd\u003eExtended drain lines or multiple exposed areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 ft\u003c\/td\u003e\n\u003ctd\u003eLong runs, special installations, or service-professional use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv class=\"yd-notice-box\"\u003e\n\u003cp\u003eIf you are between two sizes, choose a length that is slightly longer than your estimated freeze-prone section. This allows for better coverage and optional wrapping around nearby exposed drain sections.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eCustom Lengths\u003c\/h4\u003e\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eCustom lengths may be available upon request. Contact \u003ca href=\"mailto:yelodeer@yelodeer.com\"\u003e\u003cstrong\u003eyelodeer@yelodeer.com\u003c\/strong\u003e\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003cp\u003ePlease include pipe diameter, required heating length, application type, installation photos, and whether the drain line is PVC, ABS, or flexible hose.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section\"\u003e\n\u003ch4\u003eInstallation Type\u003c\/h4\u003e\n\u003cp\u003eDrainGuard uses a cut-and-connect drain-line installation. A short section of the existing drain line is removed and replaced with the included PVC Y-fitting assembly. The heating cable is then inserted through the side port and routed into the drain line.\u003c\/p\u003e\n\n\u003ch4\u003eRecommended Tools\u003c\/h4\u003e\n\u003cdiv class=\"yd-pill-grid\"\u003e\n\u003cspan\u003ePipe Cutter\u003c\/span\u003e \u003cspan\u003eMeasuring Tape\u003c\/span\u003e \u003cspan\u003eMarker\u003c\/span\u003e \u003cspan\u003eDeburring Tool\u003c\/span\u003e \u003cspan\u003ePVC or ABS Primer\u003c\/span\u003e \u003cspan\u003eSolvent Cement\u003c\/span\u003e \u003cspan\u003eSafety Glasses\u003c\/span\u003e \u003cspan\u003eCut-Resistant Gloves\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eGeneral Installation Steps\u003c\/h4\u003e\n\u003col\u003e\n\u003cli\u003eDisconnect power before installation.\u003c\/li\u003e\n\u003cli\u003eShut off the HVAC, furnace, boiler, or appliance connected to the drain line.\u003c\/li\u003e\n\u003cli\u003eLocate the freeze-prone section of the drain line.\u003c\/li\u003e\n\u003cli\u003eConfirm the drain line is non-pressurized.\u003c\/li\u003e\n\u003cli\u003eConfirm pipe material and select the correct primer and solvent cement.\u003c\/li\u003e\n\u003cli\u003eMeasure and cut the pipe conservatively.\u003c\/li\u003e\n\u003cli\u003eDeburr and clean all pipe ends.\u003c\/li\u003e\n\u003cli\u003eInstall the Y-fitting and adapter components as needed.\u003c\/li\u003e\n\u003cli\u003eInsert the heating cable through the Y-fitting side port and into the drain line.\u003c\/li\u003e\n\u003cli\u003eInstall the rubber gasket, sealing grommet, and lock nut.\u003c\/li\u003e\n\u003cli\u003eRoute any remaining cable outside the pipe or wrap it around nearby unheated drain sections if needed.\u003c\/li\u003e\n\u003cli\u003ePlug into a grounded 120 V AC outlet after installation is complete.\u003c\/li\u003e\n\u003cli\u003eConfirm the cable warms within 5–10 minutes, then check drainage flow and seals for leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch4\u003eCut Length Reference\u003c\/h4\u003e\n\u003ctable class=\"yd-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/4\" Drain Line\u003c\/td\u003e\n\u003ctd\u003eRecommended cut length: 2.75 in \/ 7 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\" Drain Line\u003c\/td\u003e\n\u003ctd\u003eRecommended cut length: 8.25 in \/ 21 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cdiv class=\"yd-critical-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eCut conservatively.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf too little pipe is removed, additional trimming can be done during installation. If too much pipe is removed, proper insertion depth may not be achieved, which may result in weak joints or leaks.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eImportant Installation Notes\u003c\/h4\u003e\n\u003cdiv class=\"yd-install-grid\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eUse Correct Cement\u003c\/strong\u003e \u003cspan\u003eUse primer and solvent cement compatible with the actual pipe and fitting materials being installed.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eDo Not Overtighten\u003c\/strong\u003e \u003cspan\u003eTighten the lock nut evenly until the rubber gasket is compressed and a watertight seal is formed.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eProtect Sharp Edges\u003c\/strong\u003e \u003cspan\u003eDeburr all cut pipe ends and protect the cable wherever it may contact sharp edges.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMaintain Drainage Slope\u003c\/strong\u003e \u003cspan\u003eKeep proper drain slope so water does not sit in the pipe and refreeze.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eProtect Outdoor Power\u003c\/strong\u003e \u003cspan\u003eFor outdoor installations, use a weatherproof outlet cover where required.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eUse Proper Extension Cord\u003c\/strong\u003e \u003cspan\u003eIf an extension cord is used, it should be grounded, 16 AWG or heavier, and compliant with applicable codes.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eUsing Pipe Insulation\u003c\/h4\u003e\n\u003cp\u003eFor best results, wrap protected drain sections with suitable pipe insulation after installation. Insulation helps reduce heat loss and improves freeze protection in exposed or unheated areas.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-pill-grid\"\u003e\n\u003cspan\u003eGarage Drain Lines\u003c\/span\u003e \u003cspan\u003eBasement Utility Areas\u003c\/span\u003e \u003cspan\u003eCrawl Space Drains\u003c\/span\u003e \u003cspan\u003eExterior Wall Exits\u003c\/span\u003e \u003cspan\u003eOutdoor Drain Sections\u003c\/span\u003e \u003cspan\u003eWind-Exposed Areas\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eTemperature Controller Recommendation\u003c\/h4\u003e\n\u003cdiv class=\"yd-notice-box\"\u003e\n\u003cp\u003eDrainGuard can operate without an external thermostat because it uses a self-regulating heating cable. However, a thermostat controller can help improve energy efficiency and convenience during winter.\u003c\/p\u003e\n\u003cp\u003eFor automatic temperature control, use with \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/pipe-heat-tape-thermostat\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Pipe Heat Tape Thermostat\u003c\/strong\u003e\u003c\/a\u003e, sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eFlexible Hose Adapter Note\u003c\/h4\u003e\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eFlexible drain hose installations require a properly sized hose barb-to-PVC adapter and clamp. These parts are not included with the kit.\u003c\/p\u003e\n\u003cp\u003eUse only properly sized fittings suitable for the hose and drain application. Do not use this product on pressurized hose or potable water supply tubing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section yd-faq-section\"\u003e\n\u003ch4\u003eCommon Questions\u003c\/h4\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat is DrainGuard used for?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eDrainGuard is used to help prevent freezing in small, non-pressurized drain lines. Common uses include HVAC condensate drains, furnace drains, boiler drains, ice maker drains, humidifier drains, dehumidifier drains, and similar low-flow drain applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eIs this only for condensate drain lines?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo. Condensate drains are a major application, but the kit may also be used for other small, non-pressurized drain lines subject to freezing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat pipe size does it fit?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe standard kit is designed for 3\/4\" drain lines and can be adapted to 1\/2\" drain lines using the included components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan this be used for pressurized or potable water lines?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo. This product is designed specifically for non-pressurized drain line applications. It is not intended for pressurized plumbing systems, potable water supply lines, PEX supply lines, or main household water lines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan it be used with flexible drain hose?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eYes, in some non-pressurized drain applications. A properly sized hose barb-to-PVC adapter and clamp are required.\u003c\/p\u003e\n\u003cp\u003eHose barb adapters and clamps are not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat if the drain line is already frozen?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eThaw and restore normal drainage before installing DrainGuard. This product is designed for freeze prevention, not as the primary method for thawing a blocked pipe.\u003c\/p\u003e\n\u003cp\u003eDo not force the cable into a blocked, collapsed, or unknown drain line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the cable need to be fully inserted into the pipe?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo. The cable does not need to be fully inserted into the pipe. Any remaining cable may stay outside the pipe or be wrapped around nearby unheated drain sections for additional freeze protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan the extra cable be wrapped around the pipe?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eYes. Extra cable may be wrapped around nearby exposed or unheated drain sections. This is an intended use of the cable design.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan the cable overlap itself?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eYes. Because this is a self-regulating heating cable, it may be coiled, spiraled, or overlapped under normal use.\u003c\/p\u003e\n\u003cp\u003eDo not sharply bend, crush, cut, splice, or force the cable into restricted spaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes it need a thermostat?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNot necessarily. The self-regulating cable adjusts heat output automatically based on temperature. However, an external pipe heating thermostat controller may be used to improve energy efficiency and convenience in some applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eDoes the cable turn off automatically?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo. A self-regulating cable reduces heat output as temperature rises, but it does not completely shut off like a thermostat-controlled device.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan I cut the heating cable to length?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eNo. Standard retail kits are supplied in fixed lengths. Do not cut, shorten, splice, or modify the heating cable in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eCan this be installed outdoors?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eIt may be used for outdoor drain-line sections when installed according to the manual and with proper weatherproof electrical protection. Outdoor plugs, outlets, and connections must be protected from rain, snow, and standing water according to applicable codes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhat should I do if I am not sure which YeloDeer cable to choose?\u003c\/summary\u003e\n\u003cdiv\u003e\n\u003cp\u003eEmail \u003ca href=\"mailto:yelodeer@yelodeer.com\"\u003e\u003cstrong\u003eyelodeer@yelodeer.com\u003c\/strong\u003e\u003c\/a\u003e with pipe type, pipe diameter, required heating length, application photos, whether the pipe is open or sealed, and whether the line is for condensate, drain, sewer, septic, or potable water.\u003c\/p\u003e\n\u003cp\u003eOur team can help you choose between DrainGuard, heavy-duty sewer pipe heating cable, and potable in-pipe heating cable options.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003ch4\u003eRelated Resources\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor automatic temperature control, use with \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/pipe-heat-tape-thermostat\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Pipe Heat Tape Thermostat\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor sealed sewer or septic pipe applications, choose \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/yelodeer-ipw-in-pipe-heating-cable-for-sewer-systems\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Heavy-Duty Sewer Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor pressurized potable water lines, choose \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Standard In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/yelodeer.com\/collections\/in-pipe-heating-cable\/products\/yelodeer-y-in-pipe-heating-cable\" target=\"_blank\"\u003e\u003cstrong\u003eYeloDeer Y-Fitting In-Pipe Heating Cable\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFor product selection help, contact \u003ca href=\"mailto:yelodeer@yelodeer.com\"\u003e\u003cstrong\u003eyelodeer@yelodeer.com\u003c\/strong\u003e\u003c\/a\u003e with pipe photos, pipe diameter, required length, and application details.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"yd-notice-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eBlog resources coming soon:\u003c\/strong\u003e We recommend adding future Knowledge Center links here, such as condensate drain freeze protection, furnace condensate drain freezing, in-pipe heating cable vs external heat tape, and how to choose the right heating cable length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eGuides\u003c\/h3\u003e\n\u003cdiv class=\"yd-product-section\"\u003e\n\u003cp\u003eUse this quick guide to confirm whether DrainGuard is the right solution before ordering. For longer explanations, we recommend reading the related articles in the YeloDeer Knowledge Center after they are published.\u003c\/p\u003e\n\n\u003ch4\u003e1. How to Choose the Right Length\u003c\/h4\u003e\n\u003cp\u003eStart from the planned Y-fitting entry point and measure the full drain section that may be exposed to freezing. Do not measure only the visible outdoor part if the pipe also passes through an exterior wall, garage, crawl space, attic, basement edge, or other unheated area.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-check-grid\"\u003e\n\u003cspan\u003eMeasure from the Y-fitting entry point\u003c\/span\u003e \u003cspan\u003eInclude hidden cold-wall sections if known\u003c\/span\u003e \u003cspan\u003eInclude outdoor exposed drain sections\u003c\/span\u003e \u003cspan\u003eInclude garage, attic, crawl space, or basement runs\u003c\/span\u003e \u003cspan\u003eAllow extra length for nearby wrapping\u003c\/span\u003e \u003cspan\u003eDo not cut the heating cable shorter\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-notice-box\"\u003e\n\u003cp\u003eIf you are between two sizes, choose the next suitable length. The heating cable does not need to be fully inserted into the pipe. Extra cable may remain outside the pipe or be wrapped around nearby exposed drain sections for supplemental freeze protection.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003e2. DrainGuard vs External Heat Tape\u003c\/h4\u003e\n\u003cdiv class=\"yd-compare-grid\"\u003e\n\u003cdiv class=\"yd-compare-card\"\u003e\n\u003cstrong\u003eExternal Heat Tape\u003c\/strong\u003e\n\u003cspan\u003eWraps around the outside of the pipe. It can work well when the pipe is fully accessible, properly insulated, and heat can transfer through the pipe wall effectively.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"yd-compare-card\"\u003e\n\u003cstrong\u003eDrainGuard In-Pipe Heating\u003c\/strong\u003e\n\u003cspan\u003ePlaces the heating cable inside the drain line, closer to where ice forms. This is useful for small drain lines, wall exits, tight spaces, and pipe sections that are difficult to wrap externally.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eExternal heat tape may not fully protect pipe sections inside walls, behind equipment, through floors, or in tight areas where complete wrapping is difficult. DrainGuard helps protect the internal drainage path from an accessible Y-fitting location.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003e3. Already Frozen? Read This First\u003c\/h4\u003e\n\u003cdiv class=\"yd-critical-box\"\u003e\n\u003cp\u003e\u003cstrong\u003eDrainGuard is designed for prevention, not emergency thawing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf the drain line is already frozen, thaw and restore normal drainage before installation. Do not force the cable into a blocked, collapsed, leaking, or unknown drain line.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"yd-check-grid\"\u003e\n\u003cspan\u003eWarm the surrounding area if safe\u003c\/span\u003e \u003cspan\u003eUse warm towels on accessible pipe sections\u003c\/span\u003e \u003cspan\u003eUse a hair dryer on low or medium heat for exposed sections\u003c\/span\u003e \u003cspan\u003eDo not use open flames or torches\u003c\/span\u003e \u003cspan\u003eDo not pour boiling water into PVC or flexible tubing\u003c\/span\u003e \u003cspan\u003eCall a professional if the frozen section is hidden or severe\u003c\/span\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003e4. Before You Install\u003c\/h4\u003e\n\u003cp\u003eDrainGuard requires a cut-and-connect installation. Make sure the drain line, pipe size, material, and access point are suitable before ordering or beginning installation.\u003c\/p\u003e\n\n\u003cdiv class=\"yd-install-grid\"\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Drain Type\u003c\/strong\u003e\n\u003cspan\u003eUse only on non-pressurized gravity drain lines, not pressurized water supply lines.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Pipe Size\u003c\/strong\u003e\n\u003cspan\u003eDesigned for 3\/4\" drain lines and adaptable to 1\/2\" drain lines using included parts.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Pipe Material\u003c\/strong\u003e\n\u003cspan\u003eBest suited for PVC or ABS drain pipe with proper primer and solvent cement.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Access\u003c\/strong\u003e\n\u003cspan\u003eYou need enough room to cut the pipe, install the Y-fitting, route the cable, and inspect for leaks.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Drainage Slope\u003c\/strong\u003e\n\u003cspan\u003ePoor slope can leave standing water in the line and increase freezing risk.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eConfirm Power Protection\u003c\/strong\u003e\n\u003cspan\u003eUse a grounded 120 V AC outlet and protect outdoor electrical connections from moisture.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch4\u003eNeed Help Choosing?\u003c\/h4\u003e\n\u003cdiv class=\"yd-alert-box\"\u003e\n\u003cp\u003eIf you are unsure whether DrainGuard fits your application, email \u003ca href=\"mailto:yelodeer@yelodeer.com\"\u003e\u003cstrong\u003eyelodeer@yelodeer.com\u003c\/strong\u003e\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003cp\u003ePlease include pipe photos, pipe diameter, pipe material, required heating length, where the line freezes, and whether the line is for condensate, furnace, boiler, ice maker, drain, sewer, septic, or potable water.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"YeloDeer","offers":[{"title":"5 ft","offer_id":45514999464177,"sku":"Y-DGK-5","price":69.99,"currency_code":"USD","in_stock":false},{"title":"10 ft","offer_id":45514999496945,"sku":"Y-DGK-10","price":79.99,"currency_code":"USD","in_stock":false},{"title":"20 ft","offer_id":45514999562481,"sku":"Y-DGK-20","price":94.99,"currency_code":"USD","in_stock":false},{"title":"30 ft","offer_id":45514999628017,"sku":"Y-DGK-30","price":109.99,"currency_code":"USD","in_stock":false},{"title":"50 ft","offer_id":45514999726321,"sku":"Y-DGK-50","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0701\/2836\/9905\/files\/DGK-main.png?v=1783582677","url":"https:\/\/yelodeer.com\/products\/drainguard-condensate-drain-heating-cable-kit","provider":"YeloDeer","version":"1.0","type":"link"}